Using Metamod
=-=-=-=-=-=-=

Installation

If you have installed Adminmod 2.50 or later, then the AM installer has already installed metamod for you. If you only want to upgrade your metamod with a more recent version, simply grab the metamod.dll (win32) or metamod_i386.so (linux) file and replace the file currently on your system.

If you want to install metamod by hand, here's what you have to do:

Install the metamod library (.dll for win32, or .so for linux) to a directory under your game directory. For instance, if you were running Counter-Strike, under win32 you might have:
```
	half-life/cstrike/addons/metamod/dlls/metamod.dll
```
Edit the "liblist.gam" file in your game directory, replacing the game dll filename with the metamod dll filename. For instance with Counter-Strike, you would change:
gamedll "dlls/mp.dll"
gamedll_linux "dlls/cs_i386.so"
to:
gamedll "addons/metamod/dlls/metamod.dll"
gamedll_linux "addons/metamod/dlls/metamod_i386.so"

Note that it's only really necessary to change the line corresponding to your OS (win32 or linux); you can leave the other line unchanged, or you can change it - it doesn't matter.

Configuration

Metamod uses several config options and config files (listed in order of priority), where "$gamedir" indicates the game directory, ie "cstrike":

+localinfo mm_pluginsfile <file>
$gamedir/addons/metamod/plugins.ini
$gamedir/metamod.ini
$localinfo mm_execcfg <file>
$gamedir/addons/metamod/exec.cfg
$gamedir/metaexec.cfg
$localinfo mm_gamedll <file>
$gamedir/metagame.ini -- No longer supported.

Config file: `plugins.ini`

Default location: $gamedir/addons/metamod/plugins.ini, ie "cstrike/addons/metamod/plugins.ini".

Plugins are described in a file "plugins.ini" and each line describes a plugin to load:

<platform> <filepath> [<description>]

Fields are whitespace delimited (tabs/spaces).

Platform is a keyword, either "linux" or "win32".
Filepath is a path to the DLL/so file. Relative paths are from the game dir; absolute paths are also valid. Paths should use unix-style forward slashes (/) and not backward slashes (\), even on windows platforms.
Description is an optional description of the plugin, used in place of the plugin's internal name in log messages and console output. Whitespace in the description is allowed; quoting is unnecessary.

Comments are recognized at only the beginning of a line, and can be in either shell style ("#") or c++ style ("//").

For instance, in "cstrike/addons/metamod/plugins.ini" these are all valid lines:

    // linux    dlls/mybot.so
    # win32     dlls/mybot-old.dll         Mybot old
    win32       dlls/mybot.dll             Mybot current
    linux       dlls/mm_stub_i386.so
    win32       dlls/mm_stub_i386.dll
    linux       dlls/mm_trace_i386.so
    win32       dlls/mm_trace_i386.dll
    linux       dlls/admin_MM.so
    win32       dlls/admin_MM.dll

Note that order in the plugins.ini file is significant.

The file is re-read at changelevel, as well as on demand (via "meta refresh" console command; see below). When the file is re-read, it will:

load any new plugins added to the file
unload any plugins that have been deleted from the file. This is only applicable to plugins loaded from the inifile. If the plugin was loaded from the console, it will not be unloaded during a refresh, whether it's in the inifile or not.
reload any plugin whose file on disk has been updated since it was loaded. Note this appears to be only useful under linux, as under Windows you cannot rename or overwrite an open DLL, so it doesn't look a loaded plugin could ever have a newer file on disk. Oh well.

The game dll is auto-detected, along the same lines AdminMod operated (looking at the "gamedir"); see "mm_gamedll" below if you want to use a "bot" DLL.

You can override the name of this file by specifying it via the +localinfo field "mm_pluginsfile".

For compatibility with previous versions, Metamod will also look for a file "metamod.ini" under the gamedir, ie "cstrike/metamod.ini".

Config file: `exec.cfg`

Default location: $gamedir/addons/metamod/exec.cfg, ie "cstrike/addons/metamod/exec.cfg". This is necessary for plugins that need to have settings specified prior to early API routines like ServerActivate, since autoexec.cfg is read too early and server.cfg is read to late. In particular, I found this necessary for the Trace plugin, in order to trace routines like RegUserMsg which are called during ServerActivate.

You can override the name of this file by specifying it via the +localinfo field "mm_execcfg".

For compatibility with previous versions, Metamod will also look for a file "metaexec.cfg" under the gamedir, ie "cstrike/metaexec.cfg".

Config file: `metagame.ini`

NOTE! This file is no longer supported! -- use instead the +localinfo field "mm_gamedll".

Config option: `+localinfo`

Several of metamod's configuration options can be specified by the "+localinfo" facility on the hlds command line. This is similar to the "setinfo" console command, where the syntax is:

+localinfo <field> <value>

Current localinfo fields recognized by metamod:

mm_pluginsfile Specifies a file listing the metamod plugins to load, instead of using the file plugins.ini. The <value> should be the pathname of the plugins file, relative to the gamedir.
mm_execcfg Specifies a file containing cvar or other configs to be exec'd after loading the plugins, instead of using the file exec.cfg. The <value> should be the pathname of the exec file, relative to the gamedir.
mm_gamedll Specifies a game or Bot DLL to be used instead of the normal gameDLL. The <value> should be the pathname of the DLL, relative to the gamedir.
This replaces using the metagame.ini file. With previous versions of AdminMod (2.10 and earlier), this same functionality was provided by the file "admin.ini".
mm_debug Specifies an initial meta_debug value.

Some examples are:

	./hlds_run -game cstrike +localinfo mm_pluginsfile mylist.ini
	./hlds_run -game cstrike +localinfo mm_execcfg mysettings.cfg
	./hlds_run -game cstrike +localinfo mm_gamedll dlls/pod_bot.so
	./hlds_run -game cstrike +localinfo mm_debug 7

Note, paths should use unix-style forward slashes (/) and not backward slashes (\), even on windows platforms.

Commands

All console command functionality is provide by a single command "meta", with multiple sub-commands:

   usage: meta <command> [<arguments>]
   valid commands are:
      version                - display metamod version info
      list                   - list plugins currently loaded
      cmds                   - list console cmds registered by plugins
      cvars                  - list cvars registered by plugins
      refresh                - load/unload any new/deleted/updated plugins
      load <name>            - find and load a plugin with the given name
      unload <plugin>        - unload a loaded plugin
      reload <plugin>        - unload a plugin and load it again
      info <plugin>          - show all information about a plugin
      pause <plugin>         - pause a loaded, running plugin
      unpause <plugin>       - unpause a previously paused plugin
      retry <plugin>         - retry a plugin that previously failed its action
      clear <plugin>         - clear a failed plugin from the list
      force_unload <plugin>  - forcibly unload a loaded plugin

where <plugin> can be either the plugin index number, or a non-ambiguous prefix string matching description or file.

Also, a single cvar is available:

   meta_debug       - set debugging level

For instance with:

  Currently loaded plugins:
        description       stat pend  file               vers    src  load  unlod
   [ 1] Trace HLSDK API   RUN   -    mm_trace_i386.so   v0.90   ini  ANY   Pause
   [ 2] adminmod          RUN   -    admin_MM.so        v2.11   ini  Start Start
   [ 3] stub              RUN   -    mm_stub_i386.so    v0.90   ini  ANY   Pause
  2 plugins, 2 running

You could then do any of the following to unload the API Trace plugin:

   meta unload 1
   meta unload trace
   meta unload mm_trace

Plugin Loading/Unloading Process

Through the process of loading and unloading, a plugin can be in one of several different states ('stat' column in the 'meta list' output):

BADFILE - The plugin file couldn't be found, or it doesn't appear to be a valid metamod plugin.
OPENED - The plugin file was found, and is a valid metamod plugin, and is ready to be loaded.
FAILED - The plugin file attempted to load or unload, but couldn't complete for some reason.
RUNNING - The plugin file was loaded and is active and running.
PAUSED - The plugin file was loaded, but has been temporarily disabled.

Also through the operation process, a plugin can have a pending "action" to next take (indicated by the 'pend' column in the 'meta list' output), and can be one of:

LOAD - Open and look at the plugin file.
ATTACH - Attach the plugin to the running game; ie activate it
UNLOAD - Remove the plugin from the running game and close the file
RELOAD - Unload/close and re-open/load the plugin, for instance when the plugin file has changed.

Example Output

Here's some other example output:

   meta info admin
            name: adminmod
            desc: Adminmod
          status: running
          action: none
        filename: dlls/admin_MM.so
            file: admin_MM.so
        pathname: /home/willday/test/cstrike/dlls/admin_MM.so
           index: 3
          source: ini file
        loadable: at server startup
      unloadable: at server startup
         version: 2.11
            date: 2001/02/04
          author: Alfred Reynolds <alfred@mazuma.net.au>
             url: http://www.adminmod.org/
          logtag: ADMIN
     last loaded: Mon Feb  5 02:06:34 2001
   DLLAPI functions:
      GameDLLInit
      DispatchThink
      ClientConnect
      ClientCommand
      ClientUserInfoChanged
      ServerActivate
   6 functions (dllapi)
   No DLLAPI-Post functions.
   No NEWAPI functions.
   No NEWAPI-Post functions.
   No Engine functions.
   No Engine-Post functions.
   Registered commands:
      admin_command
   1 commands
   Registered cvars:                      float value  string value
      users_file                             0.000000  users.ini
      maps_file                              0.000000  mapvote.txt
      default_access                         1.000000  1
      ips_file                               0.000000  0
      reserve_slots                          1.000000  1
      reserve_slots_msg                      0.000000  0
      admin_debug                            1.000000  1
      password_field                         0.000000  admin_password
      alarm_message                          0.000000  0
      alarm_time                             0.000000  0
      use_regex                              1.000000  1
      models_password_field                  0.000000  0
      models_file                            0.000000  models.ini
      models_kick_msg                        0.000000  Invalid model
      script_file                            0.000000  cstrike/dlls/admin.amx
      help_file                              0.000000  admin_help.txt
      vote_freq                            360.000000  360
      encrypt_password                       1.000000  1
      pretty_say                             1.000000  1
      admin_mod_version                      2.110000  2.11
      reserve_type                           1.000000  1
      map_ratio                             60.000000  60
      kick_ratio                            75.000000  75
      words_file                             0.000000  0
      password_timeout                    1800.000000  1800
      file_access_read                       0.000000  0
      file_access_write                      0.000000  0
      public_slots_free                     20.000000  20.000000
      allow_client_exec                      0.000000  0
      admin_balance_teams                    0.000000  0
   30 cvars

   meta cmds
   Registered plugin commands:
          plugin              command
    [  1] API trace           trace_version
    [  2] API trace           trace
    [  3] API trace           untrace
    [  4] API trace           showtrace
    [  5] Adminmod            admin_command
   5 commands, 5 available

   meta cvars
   Registered plugin cvars:
          plugin      cvar                   float value  string value
    [  1] API trace   trace_debug               3.000000  3.000000
    [  2] API trace   trace_dllapi              8.000000  8
    [  3] API trace   trace_newapi              0.000000  0
    [  4] API trace   trace_engine              8.000000  8
    [  5] Adminmod    users_file                0.000000  users.ini
    [  6] Adminmod    maps_file                 0.000000  mapvote.txt
    [  7] Adminmod    default_access            1.000000  1
    [  8] Adminmod    ips_file                  0.000000  0
    [  9] Adminmod    reserve_slots             1.000000  1
    [ 10] Adminmod    reserve_slots_msg         0.000000  0
    [ 11] Adminmod    admin_debug               1.000000  1
    [ 12] Adminmod    password_field            0.000000  admin_password
    [ 13] Adminmod    alarm_message             0.000000  0
    [ 14] Adminmod    alarm_time                0.000000  0
    [ 15] Adminmod    use_regex                 1.000000  1
    [ 16] Adminmod    models_password_fiel      0.000000  0
    [ 17] Adminmod    models_file               0.000000  models.ini
    [ 18] Adminmod    models_kick_msg           0.000000  Invalid model
    [ 19] Adminmod    script_file               0.000000  cstrike/dlls/admin.amx
    [ 20] Adminmod    help_file                 0.000000  admin_help.txt
    [ 21] Adminmod    vote_freq               360.000000  360
    [ 22] Adminmod    encrypt_password          1.000000  1
    [ 23] Adminmod    pretty_say                1.000000  1
    [ 24] Adminmod    admin_mod_version         2.110000  2.11
    [ 25] Adminmod    reserve_type              1.000000  1
    [ 26] Adminmod    map_ratio                60.000000  60
    [ 27] Adminmod    kick_ratio               75.000000  75
    [ 28] Adminmod    words_file                0.000000  0
    [ 29] Adminmod    password_timeout       1800.000000  1800
    [ 30] Adminmod    file_access_read          0.000000  0
    [ 31] Adminmod    file_access_write         0.000000  0
    [ 32] Adminmod    public_slots_free        20.000000  20.000000
    [ 33] Adminmod    allow_client_exec         0.000000  0
    [ 34] Adminmod    admin_balance_teams       0.000000  0
   34 cvars, 34 available

   meta unload stub
   Unloaded plugin 'Stub plugin'
   Currently loaded plugins:
         description       stat pend  file               vers   src  load  unlod
    [ 1] Trace HLSDK API   RUN   -    mm_trace_i386.so   v0.90  ini  ANY   Pause
    [ 2] adminmod          RUN   -    admin_MM.so        v2.11  ini  Start Start
   2 plugins, 2 running

   meta load stub
   Loaded plugin 'stub' successfully
   Currently loaded plugins:
         description       stat pend  file               vers   src  load  unlod
    [ 1] Trace HLSDK API   RUN   -    mm_trace_i386.so   v0.90  ini  ANY   Pause
    [ 2] adminmod          RUN   -    admin_MM.so        v2.11  ini  Start Start
    [ 3] stub              RUN   -    mm_stub_i386.so    v0.90  cmd  ANY   Pause
   3 plugins, 3 running

Using Metamod =-=-=-=-=-=-=